Will it fit in my operation
The Quick Change Bracket works in most applications.
In the cab of a John Deere Windrower / Swather and S-Series Combine: The bracket works in all areas, but some modifications may need to be made.
2600 is pictured below
The 2600 does cover up the top of the corner post display. This does not happen with a 2630 Display.
ARM REST MOUNTING POSITION:
The Quick Change Bracket needs to be modified to fit in the arm rest. However, this modification does not hurt the strength of the bracket.
This mounting position does cover a small amount of the corner post display.
Below, the studs are installed on the arm rest. 
There is a little gap at the bottom.
10 SWITCH BOX CONTROLLER: Both a John Deere® 2630 Greenstar Screen and a John Deere® 2600 Greenstar Screen display. - Just make sure the wing nuts on the Shouldered Studs are tight.
FITS ALL JOHN DEERE® SCREENS
4640 John Deere® Universal Display: You will need the Adapter Kit when mounting this display. The Adapter Kit offers up to 6 mounting positions for the Quick Change Bracket to best fit your cab setup.
2600 John Deere® Display: There are no issues with mounting this display. You will need to look at mounting the bracket high or low depending on how you have your setup.
2630 John Deere® Display: There are no issues with mounting this display. You will need to look at mounting the bracket high or low depending on how you have your setup.
Original John Deere® Display (WITH OR WITHOUT MOBILE PROCESSOR) - The Quick Change Bracket needs to be mounted in the high positions to not interfere with the harness plugs at the bottom of the display. It works with a mobile processor, but the cover for the cards will not open. If you need to have access to the cards, the cover on the mobile processor can be removed or a spacer can be installed between the bracket and the mobile processor.
1800 John Deere® Display: There are no issues with this display. You will need to look at mounting the bracket high or low depending on how you have your setup.
