Tablet Mounting Kits

Add a 1" or 1.5" ball to the cast John Deere (BRE10501 or BRE10147) Arm Rest Bracket on the command center.    

This bracket fits solid to the rear corner post in the cab of a John Deere.  Built field tough and the best part is it works great with Ram Mounts.  You can hold most monitors, tablets and screens.  Comes with the hardware needed to mount...

One of the advantages of this bracket is it does not block your whole side window in your tractor cab.  You can have multiple monitors close and can mount monitors above and below the bracket for best visibility.  Bolts to the two threaded...

Add a USB & USB-C High Output Power Port to the cab of any John Deere equipment that has a three prong power strip RE68495.  This kit comes with everything you to install. 1 - 4 foot 3-Pin Power Harness (Replaces a RE67013) 1 - 2.4...

Mount a tablet or iPad on the armrest in a Case IH Axial-Flow 250 Series Combine cab.   Easy to install, no drilling.  Uses 1.5" Ram Mounts.  Pick between two different size holders for the tablet.  Can be mounted on the...

Aluminum round USB & USB-C Power Plug with Voltmeter.  Enough power to charge tablets, phones and iPads quickly and efficiently. USB 3.0 & USB-C Power Plug with Volt Meter charges two devices simultaneously while the LED screen displays...

This spring loaded holder works great for larger iPads like the iPad PRO with 12.9-inch (5th and 6th Generation).  It comes with multiple different arms for holding tablets in protective cases.   COMES WITH A 1.5" C RAM Mount...

This bracket mounts to a Case IH 84340967 & 87553422 Bracket FLAT Bar in the cab.  It comes with a 1.5" RAM C Ball, single 10M Bolt and Nut.  Easy to install and can be positioned at any angle for maximum adjustability.   Why do...

Adjust the angle of the ball for the perfect screen position. This bracket comes with a 1.5" Ram Ball with an aluminum base, which means less vibration in the field. It works with Display Bracket Mounts with the hole and slot pattern. Why do I need to...

This 2-pack of wing nuts can replace John Deere OEM bracket hardware.  The wing nut has a steel insert that is tougher than brass and allows for quick repositioning of the monitor.  The plastic wings are large enough to get a solid turn for a...

You can't get a more rigid mount for the accessory rail (BRE10574) in the side window of your John Deere.  The aluminum base and two mounting bolts ensure a rock-solid base for all your RAM Mount accessories.  This item can replace a John Deere...

We get it, ordering ram mounts can be hard.  This item allows you to custom build the 1.5 inch RAM Mount setup you need for the cab of your farm equipment.  Pick which base ball, arm length and what you are going to mount to finish building...

This double ball connector allows for more reach and greater adjustability in your setup.  Comes in two different sizes 1" for the phone holder or 1.5" for monitor mounts.  

Quickly attach a Tablet / iPad holder to a two bolt John Deere Mount Bracket using the Quick Change Bracket system.  This kit includes everything you need to attach a tablet holder to the OEM bracket in John Deere Equipment with the 2-Bolt...

Add a tablet or iPad right next to your John Deere 4640 or Extended Monitor Display PFA10759.  Easy to install with the included hardware.  NOTE: WORKS WITH A 4640 (Tablet on the LEFT SIDE ONLY because of cooling fins). WORKS WITH EXTENDED...

This monitor mounting bracket fits tight in the upper right-hand corner of the cab of a John Deere 00-Series, 10-Series and 50-Series Series Combine.  Can also work on a 7760 John Deere Cotton Picker. The kit is highly adjustable using a 1.5" RAM...

Great for a 5R, 6M, 6R, 7R, 8R and 9R John Deere Cab Tractors, this bracket is easy to install in the cab with one bolt in the center.  The kit comes with the bolt, spacer, metal bracket and 1.5" RAM Ball.  The spacer insures a solid mount...

This 6M or 7M John Deere tractor mounting bracket is specifically designed for a to mount a GPS monitor or other device in the cab.   Bolts directly to the corner post and is available with either a 2-bolt JD pattern or a 4-Bolt...

This monitor mounting bracket fits tight in the upper right-hand corner of the cab of a John Deere 60-Series Combine.  Also works in a 7760 cotton picker or forage harvester with this same cab design.  It is highly adjustable using a 1.5" RAM...

This is our most universal cab corner post mounting bracket.  Works in most John Deere Cabs with the double bolt mounting option. Fits: John Deere 5E Series Tractor Cabs: 5055E, 5065E, 5075E, 5090E, 5100EJohn Deere 5R Series Tractor Cabs:...

This tablet or iPad holder has spring loaded adjustability of 9.5"-11.5" with a max width of 7.25" and 0.75" max thickness.  It comes with a 1.5" Ram Mount ball.  Secure spring loaded center allows the cradle to open up to install or remove the...

This side window mounting bracket can be used to hold a tablet, phone, GPS Monitor or Camera Monitor in the cab of a S-Series or X-Series John Deere combine (or windrower with same cab).  - Fits Model Year 2014 or newer Harvesting Cabs such as in...

RAM Mount cast aluminum arm with double socket that takes a 1.5" RAM Ball.  You pick which length you need.

This monitor mounting bracket fits tight in the upper right-hand corner of the cab of a John Deere 60 or 70-Series Combine.  Also works in a 7760 cotton picker or forage harvester with this same cab design.  It is highly adjustable using a 1.5"...

Redesigned for 2022 Harvest Season - This new design uses the vertical space in the combine cab to mount multiple screens, improving visibility over our previous design.  It is also made out of thicker material, even thicker than the standard OEM...

This corner post mounting bracket is specifically designed to mount accessories in the cab of a John Deere Tractor or Sprayer.  This cab mount will install a John Deere an Original Brown Screen, 2600, 2630 (2-Bolt Pattern) or the 4640 or 4620...